Sunfire B1600 manual Command-line Interface Dowloading Switch Firmware

FIGURE 3-8The Switch Status ⇒ Software Window (for downloading firmware)

Note – If you receive an error message saying that the data you have entered is invalid, you might have typed an incorrect IP address or an incorrect file name, or you not might have the correct access permissions for TFTP transfer. Alternatively, it is possible that there is not enough memory available on the switch.

If you download to a new destination file, select the new file from the pull-down menu for the operation code used at startup and click Save. To start the new firmware, reboot the system by clicking Save and Restart.

FIGURE 3-9The Switch Status ⇒ Software Window (at the End of the Download Process)

Command-line Interface: Dowloading Switch Firmware

1.Type the IP address of the TFTP server.

2.Select config or opcode file type.

3-22Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003