Command Usage

Use this command in conjunction with the show running-configcommand to compare the information in running memory to the information stored in non-volatile memory.

This command displays settings for key command modes. Each mode group is separated by ! symbols, and includes the configuration mode command, and corresponding commands. This command displays the following information:

System description (host name, location, contact information)

SNMP community strings

Users (names, access levels, and encrypted passwords)

VLAN database (VLAN ID, name and state)

VLAN configuration settings for each interface

IP address of the management VLAN

User authentication sequence, along with remote authentication server address and UDP port

Any configured settings for the console port and Telnet

Example

Console#show startup-config

building startup-config, please wait.....

!

hostname R&D 5 snmp-server location WC 9 snmp-server contact Charles

!

snmp-server community private rw snmp-server community public ro

!

username admin access-level 15

username admin password 7 21232f297a57a5a743894a0e4a801fc3 username guest access-level 0

username guest password 7 084e0343a0486ff05530df6c705c8bb4 enable password level 15 7 1b3231655cebb7a1f783eddf27d254ca

!

vlan database

vlan 1 name DefaultVlan media ethernet state active vlan 2 name MgtVlan media ethernet state active

Chapter 4 Command-Line Reference 4-39

Page 237
Image 237
Sunfire B1600 manual Console#show startup-config