Sunfire B1600 manual Flash/File Commands, Copy

Command Usage

The quit and exit commands can both exit the configuration program.

Example

This example shows how to quit a CLI session:

Console#quit

Press ENTER to start session

User Access Verification

Username:

4.3.2Flash/File Commands

These commands are used to manage the system code or configuration files.

Command	Function	ModePage
copy	Copies a code image or a switch configuration to or from PE		4-20
	Flash memory or a TFTP server
delete	Deletes a file or code image	PE	4-22
dir	Displays a list of files in Flash memory	PE	4-23
whichboot	Displays the files booted	PE	4-25
boot system	Specifies the file or image used to start up the system	GC	4-26

4.3.2.1copy

Use this command to move (upload/download) a code image or configuration file between the switch's Flash memory and a TFTP server. When you save the system code or configuration settings to a file on a TFTP server, that file can later be downloaded to the switch to restore system operation. The success of the file transfer depends on the accessibility of the TFTP server and the quality of the network connection.

4-20Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003