
1.4Switch Default Settings
TABLE 1-2 Switch Default Settings
Function | Default |
|
|
System Settings |
|
• Web Mgt. | Enabled |
• Secure Web Mgt. | Disabled |
• BOOTP | Enabled |
• DHCP | Enabled |
• SNMP Communities | public: Read Only |
| private: Read/Write |
• SNMP Traps | Authentication traps: enabled |
| Link up down events: enabled |
• User Name | admin (for console, Telnet, Web) |
| guest (for console, Telnet, Web) |
• Password | logon - |
| user admin, password admin |
| user guest, password guest |
| Change from Normal Exec to Privileged Exec: super |
Serial Port | Baud rate: 9600, Data bits: 8, Stop bits: 1, Parity: none |
IP Settings | Address: 0.0.0.0, Subnet mask: 255.0.0.0 |
Port Status |
|
• Port Speed | Port |
| Port |
| Port NETMGT: 10/100 Mbps, |
• Duplex Mode | Port |
| Port |
• Flow Control | Disabled |
Port Priority | Ingress priority: 0 |
Port Security | Disabled |
Spanning Tree Protocol | Enabled, Default RSTP |
| (Defaults: All parameters based on IEEE 802.1w) |
|
|