mark ? at the prompt to display a list of the commands available for the current mode. The command classes and associated modes are displayed in the following table:
TABLE 4-1 Command Modes
ClassMode
ExecNormal
Privileged
Configuration* Global
Interface
Line
VLAN Database
*You must be in Privileged Exec mode to access any of the configuration modes.
4.1.2.10Exec Commands
When you open a new console session on the switch with the user name and password guest, the system enters the Normal Exec command mode (or guest mode), displaying the Console> command prompt. Only a limited number of the commands are available in this mode. You can access all commands only from the Privileged Exec command mode (or administrator mode). To access Privilege Exec mode, open a new console session with the user name and password admin. The system now displays the Console# command prompt. You can also enter Privileged Exec mode from within Normal Exec mode, by typing the enable command, followed by the privileged level password super.
To enter Privileged Exec mode, type the following user names and passwords:
Username: admin
Password: admin login password
CLI session with the Sun Fire B1600 is opened.
To end the CLI session, enter [Exit].
Console#
