Command Mode

Global Configuration

Command Usage

You cannot set a null password. You have to enter a password to change the command mode from Normal Exec to Privileged Exec with the enable command (page 4-13).

There is no need to specify encrypted passwords on the command line. The option 7 is used internally by the switch at system bootup time to enable the switch to read any encrypted passwords stored in the configuration file.

Example

Console(config)#enable password level 15 0 admin

Console(config)#

Related Commands

enable (4-13)

4.3.3.4ip http port

Use this command to specify the TCP port number used by the Web browser interface. Use the no form to use the default port.

Syntax

ip http port port-number

no ip http port

port-number– The TCP port to be used by the browser interface. (Range: 1 to 65,535)

Default Setting

80

Chapter 4 Command-Line Reference 4-31

Page 229
Image 229
Sunfire B1600 manual Ip http port, Consoleconfig#enable password level 15 0 admin