Syntax

ip igmp snooping query-interval seconds

no ip igmp snooping query-interval

seconds – The frequency at which the switch sends IGMP host-query messages. (Range: 60-125)

Default Setting

125 seconds

Command Mode

Global Configuration

Example

The following shows how to configure the query interval to 100 seconds:

Console(config)#ip igmp snooping query-interval 100

Console(config)#

4.3.14.9ip igmp snooping query-max-response-time

Use this command to configure the snooping report delay. Use the no form of this command to restore the default.

Syntax

ip igmp snooping query-max-response-time seconds

no ip igmp snooping query-max-response-time

seconds – The report delay advertised in IGMP queries. (Range: 5-25)

Default Setting

10 seconds

4-146Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003

Page 344
Image 344
Sunfire B1600 manual Ip igmp snooping query-max-response-time, Consoleconfig#ip igmp snooping query-interval