Sunfire B1600 manual Table B-4Web Interface Error Messages

TABLE B-4Web Interface Error Messages (Continued)

Menu	Message	Description
Advanced	Data is invalid.	General error.
Configuration	User privileges are not enough to	Privileges insufficient.
	perform this operation.
Class of Service
Basic Traffic	Cos Value is out of range.	CoS Value is out of range.
Prioritisation	Data is invalid.	General error.
	Priority is out of range.	Priority is out of range.
	Queue weight must be in a order of	Invalid Queue weight.
	Q0<=Q1<=Q2<=Q3

Layer 3/4

Traffic

Prioritisation

Traffic Class is out of range.	Traffic Class is out of range.
User privileges are not enough to	Privileges insufficient.
perform this operation.
Cos Value is out of range.	CoS Value is out of range.
Please select IP Precedence or DSCP	Select one of these options when priority service is
mode	enabled.
Traffic Class is out of range.	Traffic Class is out of range.
User privileges are not enough to	Privileges insufficient.
perform this operation.

Address Tables	Aging time is out of range.	Maximum address aging time exceeded.
	User privileges are not enough to	Privileges insufficient.
	perform this operation.
Up Links, Down Links
Status	Cannot set port capabilities.	Incorrect speed/duplex mode for specified port.
	Data is invalid.	General error.
	User privileges are not enough to	Privileges insufficient.
	perform this operation.

Link	Cannot add aggregated link. The
Aggregation	specified aggregated link is full or data
	is invalid.
	Cannot create aggregated link.

The specified aggregated link is full or data is invalid.

Maximum number of aggregated links has been exceeded.

Cannot remove aggregated link. There is a problem with the aggregated link table.

Cannot remove member of aggregated There is a problem with the aggregated link table. link. Data is invalid.

B-12Sun Fire B1600 Blade System Chassis Switch Administration Guide • June 2003