Username: guest

Password: guest login password

CLI session with the Sun Fire B1600 is opened.

To end the CLI session, enter [Exit].

Console>enable

Password: privileged level password

Console#

4.1.2.11Configuration Commands

Configuration commands are privileged level commands used to modify switch settings. These commands modify the running configuration only and are not saved when the switch is rebooted. To store the running configuration in non-volatile storage, use the copy running-configstartup-configcommand.

The configuration commands are organized into these modes:

Global Configuration – These commands modify the system level configuration, and include commands such as hostname and snmp-server community.

Interface Configuration – These commands modify the port configuration such as speed-duplexand negotiation.

Line Configuration – These commands modify the console port and Telnet configuration, and include command such as exec-timeoutand silent-time.

VLAN Configuration – Includes the command to create VLAN groups.

To enter the Global Configuration mode, type the command configure in Privileged Exec mode. The system prompt changes to Console(config)#, which gives you access privilege to all Global Configuration commands.

Console#configure

Console(config)#

Chapter 4 Command-Line Reference 4-9

Page 207
Image 207
Sunfire B1600 manual Configuration Commands, Console#configure