3Com MSR 50, MSR 30 manual Port Isolation Configuration Commands, Display port-isolate group

PORT ISOLATION CONFIGURATION

42 COMMANDS

display port-isolate group

Syntax	display port-isolate group
View	Any view
Parameter	None
Description	Use the display port-isolate group command to display information of the
	default isolation group (Group 1).
Example	# Display information of the default isolation group.
	<Sysname> display port-isolate group
	Port-isolate group information:
	Uplink port support: NO
	Group ID: 1
	Ethernet1/1	Ethernet1/2

Table 116 Description on the output information of the display port-isolate group command

Field	Description
Port-isolate group information	Information of the isolation group
Uplink port support	Whether support uplink port
Group ID	Isolation group number
Ethernet1/1 Ethernet1/2	Ordinary ports (non-uplink ports) in the isolation
	group

port-isolate enable

Syntax port-isolate enable

undo port-isolate enable

View Ethernet interface view, port group view

Parameter None