1439

source-group: Specifies to implement IPv6 multicast load splitting on a per-source and per-group basis.

Description Use the multicast load-splittingcommand to enable load splitting of IPv6 multicast traffic.

Use the undo multicast load-splittingcommand to disable load splitting of

IPv6 multicast traffic.

By default, load splitting of IPv6 multicast traffic is disabled.

Example # Enable load splitting of IPv6 multicast traffic on a per-source basis.

<Sysname> system-view

[Sysname] multicast ipv6 load-splitting source

multicast ipv6 longest-match

Syntax multicast ipv6 longest-match

undo multicast ipv6 longest-match

View System view

Parameter None

Description Use the multicast ipv6 longest-matchcommand to configure route selection based on the longest match, namely based on the prefix length.

Use the undo multicast ipv6 longest-match command to remove the configuration of route selection based on the longest match.

By default, routes are selected in order of routing entries.

Example # Configure route selection based on the longest match.

<Sysname> system-view

[Sysname] multicast ipv6 longest-match

multicast ipv6 minimum-hoplimit

Syntax multicast ipv6 minimum-hoplimit ttl-value

undo multicast ipv6 minimum-hoplimit

View Interface view

Parameter hoplimit-value: Minimum hop limit required for an IPv6 multicast packet to be forwarded on the interface, in the range of 1 to 255.

Page 1439
Image 1439
3Com MSR 50, MSR 30 manual Multicast ipv6 longest-match, Multicast ipv6 minimum-hoplimit, 1439