3Com MSR 30, MSR 50 Display ike peer, Display ike proposal, Syntax display ike peer peer-name

2156 CHAPTER 141: IKE CONFIGURATION COMMANDS

display ike peer

Syntax display ike peer [ peer-name]

View Any view

Parameter peer-name: Name of the IKE peer, a string of 1 to 15 characters.

Description Use the display ike peer command to display information about a specified or all IKE peers.

Related command: ike peer (system view).

Example # Display information about all IKE peers.

<Sysname> display ike peer

---------------------------

IKE Peer: rtb4tunn

exchange mode: main on phase 1

pre-shared-key: 123

peer id type: ip

peer ip address: 44.44.44.55 local ip address:

peer name:

nat traversal: disable

dpd: dpd1

---------------------------

Table 570 Description on the fields of the display ike peer command

Field	Description
exchange mode	IKE negotiation mode in phase 1
pre-shared-key	Pre-shared key used in phase 1
peer id type	ID type used in phase 1
peer ip address	IP address of the remote security gateway
local ip address	IP address of the local security gateway
peer name	Name of the remote security gateway
nat traversal	Whether NAT traversal is enabled
dpd	Name of the peer DPD

display ike proposal

Syntax display ike proposal

View Any view

Parameter None