152 Using the System Setup Program
Table 2-14. LAN Device Commands (NetFn: 0x0CH)
Command NetFn Code IPMI2.0 BMC
Set LAN Configuration Parameters
(Note: Parameter 9 and 25 are not
supported.)
Transport 0x01h M Yes
Get LAN Configuration Parameters
(Note: Parameter 9 and 25 are not
supported.)
Transport 0x02h M Yes
Suspend BMC ARP Transport 0x03h O Yes
Get IP/UDP/RMCP Statistics Transport 0x04h O No
Table 2-15. Serial/Modem Device Commands (NetFn: 0x 0CH)
Command NetFn Code IPMI2.0 BMC
Set Serial/Modem Configuration Transport 0x10h M Yes
Get Serial/Modem Configuration Transport 0x11h M Yes
Set Serial/Modem Mux Transport 0x12h O Yes
Get TAP Response Codes Transport 0x13h O No
Set PPP UDP Proxy Transmit Data Transport 0x14h O No
Get PPP UDP Proxy Transmit Data Transport 0x15h O No
Send PPP UDP Proxy Packet Transport 0x16h O No
Get PPP UDP Proxy Receive Data Transport 0x17h O No
Serial/Modem Connection Active Transport 0x18h M Yes
Callback Transport 0x20h O No
SOL Activating Transport 0x19h O Yes
Set SOL Configuration Transport 0x20h O Yes
Get SOL Configuration Transport 0x21h O Yes
Set User Callback Options Transport 0x1Ah O No
Get User Callback Options Transport 0x1Bh O No
Set Serial Routing Mux Transport 0x1Ch O Yes