204 Installing System Components
4
Lift the module assembly from the sled tray and then disconnect the
power cable from the power supply. See Figure3-11.
5
Remove the module assembly from the sled tray. See Figure3-11.
Figure 3-11. Removing and Installing a PSU2/4 Module Assembly
Installing the PSU2/4 Module Assembly
CAUTION: Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1
Connect the power cable to the new PSU module. See Figure3-10 for
cable routing.
2
Position the PSU2/4 module assembly on top of the sled tray.
1 PSU power cable 2 screw
3 thumbscrew 4 PSU2/4 module assembly
5 air baffle