Removing a Single-Wide Sled Blank

1Pull up on the sled blank latch at the bottom of the sled to disengage the sled from the server enclosure. See Figure 3-3.

2Using the handle, slide the sled out of the enclosure. See Figure 3-3.

Figure 3-3. Removing and Installing a Single-Wide Sled Blank

2

1

1

release latch

2

single-wide sled blank

Installing a Single-Wide Sled Blank

1Orient the sled blank so that the release latch is in the bottom of the sled. See Figure 3-3.

2Slide the sled blank into the enclosure until the release latch snaps into place. See Figure 3-3.

Installing System Components

191

Page 191
Image 191
Dell C8000 owner manual Removing a Single-Wide Sled Blank, Installing a Single-Wide Sled Blank, 191