264

<command> is the command for configuring the fresh air mode For example, the command line should have the following format:

ipmitool –I lanplus –P root -U root –H 192.168.70.58 raw 0x30 0x43 0x01 0x01

2You can do either of the following commands to view the server enclosure fresh air status:

–To view the server enclosure fresh air status when the fresh air mode is enabled, enter the following command:

ipmitool –I lanplus –P root -U root –H 192.168.70.58 raw 0x30 0x44 0x1 01

–To view the server enclosure fresh air status when the fresh air mode is disabled, enter the following command:

ipmitool –I lanplus –P root -U root –H 192.168.70.58 raw 0x30 0x44 0x01 00

Troubleshooting

Dell C8000 owner manual 264