About the System 47
002Fh No Microcode
Be Updated
Pause Processor
microcode load
failed
Ensure that your processors
match and conform to the
type described in the
processor technical
specifications outlined in
your system’s Getting Started
Guide.
8012h SATA 0 Device
Not Found
Pause SATA 0 device
not found
Check if the SATA port 0 is
enabled. See "SATA
Configuration" on page95.
Install a SATA device to SATA
port 0.
If the problem persists, see
"Getting Help" on page289.
8013h SATA 1 Device
Not Found
Pause SATA 1 device
not found
Check if the SATA port1 is
enabled. See "SATA
Configuration" on page95.
Install a SATA device to SATA
port 1.
If the problem persists, see
"Getting Help" on page289.
8014h SATA 2 Device
Not Found
Pause SATA 2 device
not found
Check if the SATA port 2 is
enabled. See "SATA
Configuration" on page95.
Install a SATA device to SATA
port 2.
If the problem persists, see
"Getting Help" on page289.
8015h SATA 3 Device
Not Found
Pause SATA 3 device
not found
Check if the SATA port 3 is
enabled. See "SATA
Configuration" on page95.
Install a SATA device to SATA
port 3.
If the problem persists, see
"Getting Help" on page289.
Error
Code
Error Message Response Error Cause Corrective Actions