Item

Indicator, Button, or

Icon

Description

 

Connector

 

 

 

 

 

 

8

Sled release latch

 

Press to release the sled from the

 

 

 

enclosure.

9

Power-on indicator/

 

The power-on indicator lights when the

 

power button

 

sled power is on.The power-on indicator

 

 

 

lights amber when the system critical

 

 

 

event occurs.

 

 

 

NOTE: The power-on indicator lights amber

 

 

 

according to critical system error log (SEL)

 

 

 

assertion. If the SEL is full or a deassertion

 

 

 

event occurred while sensor monitoring is

 

 

 

paused (e.g. fan monitoring is paused during

 

 

 

system power off), the power-on indicator

 

 

 

turns amber. To turn off an amber LED and

 

 

 

reset the power-on indicator to normal

 

 

 

condition (solid green), either perform a

 

 

 

BMC cold reset or reseat the sled in the

 

 

 

server enclosure.

 

 

 

The power button turns the compute sled

 

 

 

on.

 

 

 

NOTES:

 

 

 

• When powering on the sled, the video

 

 

 

monitor can take from several seconds

 

 

 

to over 2 minutes to display an image,

 

 

 

depending on the amount of memory

 

 

 

installed in the system.

 

 

 

• On ACPI-compliant operating

 

 

 

systems, turning off the sled using the

 

 

 

power button causes the sled to

 

 

 

perform a graceful shutdown before

 

 

 

power to the sled is turned off.

 

 

 

• To force an ungraceful shutdown, press

 

 

 

and hold the power button for five

 

 

 

seconds.

10

VGA connector

 

Connects a VGA display to the system.

11

Serial connector

 

Connects a serial device to the system.

30

About the System

Page 30
Image 30
Dell C8000 owner manual Reset the power-on indicator to normal