Table 2-1. D4 Token Table (continued)
Token | Setup Option | Description |
|
|
|
4854 | Maximum | Auto detects the PCIe maximum payload size. |
| Payload Size |
|
4855 | Maximum | Sets the PCIe maximum payload size to 128 Bytes. |
| Payload Size |
|
4856 | Maximum | Sets the PCIe maximum payload size to 256 Bytes. |
| Payload Size |
|
4857 | WHEA Support | Disables Windows Hardware Error Architecture. |
4858 | WHEA Support | Enables Windows Hardware Error Architecture. |
4859 | NIC | Sets PXE boot from onboard NIC to |
| Enumeration | adapter. (default) |
485A | NIC | Sets PXE boot from |
| Enumeration | NIC. |
485B | PCIe Generation | Sets the PCI signaling rate at Gen3 8.0 Gigabits |
|
| bandwidth. |
485C | PCIe Generation | Sets the PCI signaling rate at Gen2 5.0 Gigabits |
|
| bandwidth. |
485D | PCIe Generation | Sets the PCI signaling rate at Gen1 2.5 Gigabits |
|
| bandwidth. |
485E Reboot on WOL (ROW)
Disables ROW. (default)
The ROW repurposes the Wake on LAN (WOL) signal to reboot the system board when the system is in S0/S3 state.
485F Reboot on WOL (ROW)
4860 USB PORT with
BMC
Enables ROW.
ROW repurposes the WOL signal to reboot the system board when the system is in S0/S3 state. When a WOL packet is received by the NIC, the wake up signal generated by the NIC shall cause a hardware reboot of the system board.
Allows you to electrically disable the internal USB port which contacts to BMC.
