Dell C8000 owner manual Removing the PSU1/3 Module Assembly, 201

Removing the PSU1/3 Module Assembly

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized is not covered by warranty. Read and follow the safety instructions that came with the product.

NOTE: In addition to supplying power to the system, the PSU modules also have internal fans that provide thermal cooling for the PSU modules in the power sleds. A PSU module must be replaced if an internal fan failure occurs.

1Remove the power sled. See "Removing a Power Sled" on page 198.

2Remove the two screws securing the PSU1/3 module assembly. See Figure 3-9.

3Slide the module assembly back to free it from the metal guides on the sled tray. See Figure 3-9.

4Lift the module assembly from the sled tray and then disconnect the power cable from the power supply. See Figure 3-9.

5Remove the module assembly from the sled tray. See Figure 3-9.

Figure 3-9. Removing and Installing a PSU1/3 Module Assembly

Installing System Components

201