Option | Description |
|
|
Chassis Level Capping | Set as chassis level or sled level power capping. (The |
(Disabled default) | default setting is referred from BMC). The system |
| determines the power consumption of the enclosure and |
| sleds, and constantly attempts to maintain the enclosure’s |
| power consumption below the cap. |
Sled Power Capping | NOTE: This option is enabled when the Chassis Level |
(0 default) | Capping is set to Disabled. |
| The sled’s own power capping infrastructure is able to |
| determine power consumption of the sleds. When set to 0, |
| the power capping function is disabled. The minimum |
| wattage rating should not less than 100 W and the |
| maximum wattage rating should not be more than the |
| power budget value. Settings range from 100 to 1000 W. |
|
|
Using the System Setup Program
85