Dell C8000 Viewing or Changing the FCB Configuration Information, Configuring the Snmp Traps, 278

Viewing or Changing the FCB Configuration Information

The FCB configuration information is stored in the FCB board’s internal EEPROM. The FCB configuration file is a text (TXT) file. You must use TFTP server to retrieve the configuration data and then use Notepad or a text editor to view or change the configuration data.

For example, a configuration data should have the following information:

CONNECT.TYPE=STATIC/DHCP

IP=192.168.0.120

NETMASK=255.255.255.0

GATEWAY=192.168.0.1

TRAP.DESTINATION1=0.0.0.0

TRAP.DESTINATION2=0.0.0.0

TRAP.DESTINATION3=0.0.0.0

TRAP.DESTINATION4=0.0.0.0

TRAP.DESTINATION5=0.0.0.0

SNMP.RD.COMMUNITY.STR=public

SNMP.RW.COMMUNITY.STR=private

POWERCAPPING.R=3

POWERCAPPING.W_DELTA=20

POWERCAPPING.K_CNT=3

Configuring the SNMP Traps

1Import the FCB configuration data.

2Use a Notepad or text editor to edit the configuration data.

3Enter an IP address in the appropriate Trap Destination field.

4Set the SNMP read community string in SNMP RD COMMUNITY STR. By default, the SNMP read community string is public.

5Set the SMP read-write community string in SNMP RW COMMUNITY STR. By default, the SNMP read-write community string is private.

6Save the file.

7Use the TFTP server software to upload the configuration file.

278

Updating Firmware Images and Monitoring the PDU Power Status