Table
System | Safe Boot Code Firmware | Operational Code Firmware |
Configuration | Behavior | Behavior |
Server enclosure | • FCB firmware stays in safe |
with compute | boot mode and waits for |
sleds | BMC to update firmware. |
| • FCB firmware detects sled |
| modules during initialization |
| only. When you replace a |
| compute sled, the FCB |
| controller needs to reset to |
| detect the new sled. |
| • The reset to default button |
| does not work |
•FCB firmware disables network/SNMP service
•FCB firmware update is done by the BMC
•FCB firmware updates status to BMC via
•The firmware update may fail but not be broken if you install a compute sled into the server enclosure while the FCB firmware update is in progress
•The reset to default button does not work
