Fujitsu BX600 manual Main Menu, Selection Criteria, Non-Configurable Data, Command Buttons

Main Menu

Web-Based Management Interface

6.2 Main Menu

6.2.1Groups Administration

6.2.1.1Managing Uplink Sets

6.2.1.1.1. Configuring Uplink Set Configuration Page

An "Uplink Set" is defined as a set of 1 to n external (uplink) ports, which is be used in port group definitions to connect a group of server blades to the customer's LAN. The purpose of the uplink set configuration is to create groups, and to add or modify the existing external ports to groups. Link state, port backup, and IGMP snooping of the uplink set groups can be configured in this page.

Selection Criteria

Uplink Set Name – Use this pull-down menu to select one of the existing uplink set.

Configurable Data

Uplink Set Name – Input the uplink set name to create a new group. It can be up to 32 alphanumeric characters, including blanks.

Link State – Use this pull-down menu to configure link state. Port Backup – Use this pull-down menu to configure port backup IGMP snooping –Use this pull-down menu to configure IGMP snooping

Participation –Use this field to specify whether a interface will participate in this uplink set. The factory default is 'Exclude'. The possible values are:

-Include: This interface is the member of the uplink set.

-Exclude: This interface is not the member of the uplink set.

Non-Configurable Data

Slot/Port – The interface

Type – The interface type. Type should be external.

Status – The interface is belong to this port group or not.

Command Buttons

44 Intelligent Blade Panel Module