![](/images/new-backgrounds/1169983/169983383x1.webp)
Management Commands |
| Command Reference |
This command sets a client IP mask for an SNMP community. The address is the associated community SNMP packet sending address and is used along with the client IP address value to denote a range of IP addresses from which SNMP clients may use that community to access the device. A value of 255.255.255.255 will allow access from only one station, and will use that machine's IP address for the client IP Address. A value of 0.0.0.0 will allow access from any IP address. The name is the applicable community name.
Syntax |
<name> - community name. <ipmask> - a client IP mask.
no - This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community name. The community name may be up to 16 alphanumeric characters.
Default Setting
0.0.0.0
Command Mode
Global Config
This command restricts access to IBP information. The access mode is
Syntax |
snmp-server community {ro rw} <name>
<name> - community name. <ro> - access mode is
Default Setting
None
191 | Intelligent Blade Panel Module |
|