Fujitsu BX600 manual Configuring Telnet Session Page Configurable Data

Panel Settings Menu

Web-Based Management Interface

6.2.2.1.4Configuring Telnet Session Page Configurable Data

Telnet Session Timeout (minutes) occur on a telnet session before the from 1 to 160. The factory default is 5.

-Specify how many minutes of inactivity should session is logged off. You may enter any number

Maximum Number of Telnet Sessions - Use the pulldown menu to select how many simultaneous telnet sessions will be allowed. The maximum is 5, which is also the factory default.

Allow New Telnet Sessions - If you set this to no, new telnet sessions will not be allowed. The factory default is yes.

Password Threshold - When the logon attempt threshold is reached on the console port, the system interface becomes silent for a specified amount of time before allowing the next logon attempt. (Use the silent time command to set this interval.) When this threshold is reached for Telnet, the Telnet logon interface closes. The default value is 3.

Command Buttons

Submit - Update the IBP module with the values on the screen. If you want the IBP module to retain the new values across a power cycle you must perform a save

66 Intelligent Blade Panel Module