Fujitsu BX600 manual Dot1x max-req 1-10 no dot1x max-req, 3.8 dot1x re-authentication

Security Commands Command Reference

dot1x max-req <1-10> no dot1x max-req

<1-10> - maximum number of times (Range: 1 – 10).

no - This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant to the default value, that is, 2.

Default Setting

2

Command Mode

Interface Config

7.9.3.8dot1x re-authentication

This command enables re-authentication of the supplicant for the specified port.

Syntax

dot1x re-authentication no dot1x re-authentication

no - This command disables re-authentication of the supplicant for the specified port.

Default Setting

Disabled

Command Mode

Interface Config

7.9.3.9dot1x re-reauthenticate

This command begins the re-authentication sequence on the specified port. This command is only valid if the control mode for the specified port is 'auto'. If the control mode is not 'auto' an error will be returned.

238 Intelligent Blade Panel Module