Fujitsu BX600 manual Configurable Data

Groups Administration

Web-Based Management Interface

6.2.1.5Managing Service VLAN Groups

6.2.1.5.1. Configuring Service VLAN Configuration Page

Selection Criteria

Service VLAN Name - You can use this screen to reconfigure an existing Service VLAN, or to create a new one. Use this pull down menu to select one of the existing Service VLANs, or select 'Create' to add a new one.

Configurable Data

Service VLAN Name – Specify the Service VLAN Name for the new Service VLAN. It can be up to 32 alphanumeric characters, including blanks.

Service VLAN ID - Specify the VLAN Identifier for the new Service VLAN. (You can only enter data in this field when you are creating a new Service VLAN.) The range of the VLAN ID is from 1 to 4094.

Uplink Set Name – Specify the uplink set for the external connection. If the pulldown menu shows "----------", it means that there is no available uplink set.

Participation – Use the pull-down menu to configure a interface to participate in this Service VLAN. The factory default is ‘Exclude’. The possible values are:

-Include: This interface is the member of the Service VLAN.

-Exclude: This interface is not the member of the Service VLAN.

Non-Configurable Data

Slot/Port - Indicates the interface.

Type – The interface type. Type could be Internal.

Status - Indicates the current value of the participation parameter for the interface.

Command Buttons

Submit - Update the IBP with the values on this screen. If you want the IBP to retain the new values across a power cycle, you must perform a save.

Delete - Delete this Service VLAN.

55 Intelligent Blade Panel Module