Management Commands

 

Command Reference

If you want to remove this lock, this Blade server must not be managed by any Virtual IO Manager. In order to release the lock without using the Virtual IO Manager issue the command "no lock <lock_identifier>" for each lock identifier that is registered.”

Command Mode

Global Config

7.5.9.3lock_reset

This command resets the IBP to unlock status, and restore all lock configuration.

Syntax

lock_reset

Default Setting

None

Command Mode

Global Config

7.5.9.4show lock

This command displays the information which contented the lock status and the list of lock identifiers that are registered. And displays the current lock message.

Syntax

show lock

Default Setting

None

Command Mode

Privileged Exec

Display Message

Lock Status: This field indicates the current lock status.

Lock Message: This field displays the message in the Web-GUI of the IBP when a lock is set.

Identifier: This field specifies the registered “lock_identifier” with this lock.

State: The state may have the values of None, Normal, or Exclusive.

207

Intelligent Blade Panel Module

 

Page 208
Image 208
Fujitsu BX600 manual Lockreset, Show lock