Fujitsu BX600 manual Sntp server, Sntp clock timezone

SNTP Commands Command Reference

<poll-retry> - Polling retry in seconds. The range is 0 to 10.

no - This command will reset the poll retry for SNTP unicast clients to its default value.

Default Setting

The default value is 1.

Command Mode

Global Config

7.10.2.7sntp server

This command configures an SNTP server (with a maximum of three) where the server address can be an ip address or a domain name and the address type either ipv4 or dns. The optional priority can be a value of 1-3, the version is a value of 1-4, and the port id is a value of 1-65535.

Syntax

sntp server <ipaddress/domain-name> <addresstype> [<1-3> [<version> [<portid>]]] no sntp server remove <ipaddress/domain-name>

<ipaddress/domain-name > - IP address of the SNTP server.

<addresstype > - The address type is ipv4 or dns.

<1-3> - The range is 1 to 3. <version> - The range is 1 to 4. <portid> - The range is 1 to 65535.

no - This command deletes an server from the configured SNTP servers.

Default Setting

None.

Command Mode

Global Config

7.10.2.8sntp clock timezone

256 Intelligent Blade Panel Module