Fujitsu BX600 manual Port Security Configuration Commands Port-security, Port-security max-dynamic

Security Commands Command Reference

<1-255> - max timeout (Range: 1 to 255). <1-3> - The valid value of index is 1, 2, and 3.

no - This command is used to reset the timeout value to the default value.

Default Setting

3

Command Mode

Global Config

7.9.6Port Security Configuration Commands

7.9.6.1port-security

This command enables port locking at the system level (Global Config) or port level (Interface Config).

Syntax

port-security no port-security

Default Setting

None

Command Mode

Global Config, Interface Config

7.9.6.2port-security max-dynamic

This command sets the maximum of dynamically locked MAC addresses allowed on a specific port.

248 Intelligent Blade Panel Module