Fujitsu BX600 manual Default settings for all the configuration commands, Ssl

The default settings for all the configuration commands			Default Settings
	SSL	HTTP Mode (Secure): Disabled
		Secure Port: 443
		Secure Protocol Level(s): TLS1 SSL3
	802.1X Port Authent.	disable
	RADIUS Client	disable
	IGMP Snooping	disable
	802.3ad	enable
	SNTP Client	disable
	TACACS	disable
	StormControl	enable
	Link State	disable
	Port-Backup	disable
	SNMP

9.2 The default settings for all the configuration commands

The default settings for all the configuration commands are shown in the following table.

SB9 DEFAULT CONFIG
configure mode
	Sntp	sntp unicast client poll-interval 6
		sntp unicast client poll-timeout 5
		sntp unicast client poll-retry 1
		sntp broadcast client poll-interval 6
		sntp client port 123
		sntp clock timezone Taipei 8 0 before-utc
	logging buffered	logging buffered
		logging buffered wrap
		no logging console
		no logging syslog
		no logging syslog port

282 Intelligent Blade Panel Module