Management Commands |
| Command Reference |
<gateway > - IP address of the default gateway
no - Restore the default IP address of the default gateway
Default Setting
IP address: 0.0.0.0
Command Mode
Global Config
7.5.1.7ip address protocol
This command specifies the network configuration protocol to be used. If you modify this value, the change is effective immediately.
Syntax |
ip address protocol {{bootp dhcp [<vlanID>]} none}
<bootp> - Obtains IP address from BOOTP. <dhcp> - Obtains IP address from DHCP.
<none> - Obtains IP address by setting configuration. <vlanID> - VLAN ID (Range: 1 – 4094).
Default Setting
None
Command Mode
Global Config
7.5.1.8ip address mgmt-vlan
This command specifies the network configuration inband administration VLAN ID to be used. If you modify this value, the change is effective immediately.
175 | Intelligent Blade Panel Module |
|
