Security Commands |
| Command Reference |
7.9.3.3dot1x login
This command assigns the specified authentication login list to the specified user for 802.1x port security. The <user> parameter must be a configured user and the <listname> parameter must be a configured authentication login list.
Syntax |
dot1x login <user> <listname>
<user> - is the login user name. <listname> - an authentication login list.
Default Setting
None
Command Mode
Global Config
7.9.3.4dot1x system-auth-control
This command is used to enable the dot1x authentication support on the IBP. By default, the authentication support is disabled. While disabled, the dot1x configuration is retained and can be changed, but is not activated.
Syntax |
dot1x system-auth-control no dot1x system-auth-control
no - This command is used to disable the dot1x authentication support on the IBP.
Default Setting
Disabled
Command Mode
Global Config
235 | Intelligent Blade Panel Module |
|
