Grandstream Networks 486 - page 30

HandyTone-486 User Manual Grandstream Networks, Inc.
30
6.2.4 Saving the Configuration Changes
Once a change is made, the user should click the “Update” button in the Configuration
Menu. The HandyTone ATA will then display the following screen to confirm that the
changes have been saved.
Grandstream Device Configuration
STATUS BASIC SETTINGS ADVANCED SETTINGS
Your configuration changes have been saved.
They will take effect on next reboot.
All Rights Reserved Grandstream Networks, Inc. 2005
6.2.5 Rebooting the HandyTone-486 from remote
The user/administrator of the HandyTone-486 can remotely reboot the HandyTone ATA
by pressing the “Reboot” button at the bottom of the configuration page. Once done, the
following screen will be displayed to indicate that rebooting is underway.
Grandstream Device Configuration
The device is rebooting now...
You may relogin by clicking on the link below in 30 seconds.
Click to relogin
All Rights Reserved Grandstream Networks, Inc. 2005
At this point, the user can relogin to the HandyTone ATA after waiting for about 30
seconds.