Grandstream Networks 486 user manual Basic Operations, Get Familiar with Key Pad and Voice Prompt

HandyTone-486 User Manual Grandstream Networks, Inc.

5 Basic Operations

5.1Get Familiar with Key Pad and Voice Prompt

HandyTone-486 has stored a voice prompt menu (Interactive Voice Response or IVR) for quick browsing and simple configuration.

To enter this voice prompt menu, simply press the button or “***” from the analog phone.

Menu	Voice Prompt	User’s Options
Main Menu	“Enter a Main Option”	Enter ‘*’ to menu_01
		Enter 00-06, 99 menu option
01	“DHCP Mode”,	Enter ‘9’ to toggle the selection
	“Static IP Mode”
02	“IP Address “ + IP address	It will prompt you with the current
		WAN IP address.
		Enter 12 digit new IP address if in Static
		IP Mode
03	“Subnet “ + IP address	Same as menu 02
04	“Gateway “ + IP address	Same as menu 02
05	“DNS Server “ + IP address	Same as menu 02

06“TFTP Server “ + IP Same as menu 02 address

47	“Direct IP Calling”	When entered, you will be prompted a
		dial tone, then enter 12 digit IP address
		This menu can be also entered by
		pressing the button again
86	“Voice Messages Pending”	Enter 9 to dial pre-configured phone
	“No Voice Messages”	number to retrieve VM
99	“RESET”	Enter ‘9’ to confirm the RESET
		Enter MAC address to restore factory
		default setting
	“Invalid Entry”	Automatically return to Main Menu

NOTES:

•Once the button is pressed, it enters the IVR main menu. If the button is pressed again, while it is already in the voice prompt menu state, it jumps to “Direct IP Calling” option and dial tone plays in this state to allow direct IP to IP calling

8