HandyTone-486 User Manual

Grandstream Networks, Inc.

PPPoE Link Up:

disabled

NAT:

detected NAT type is full cone

NAT Mapped IP:

70.22.149.194

NAT Mapped Port:

61063

Total Inbound Calls:

0

Total Outbound Calls:

1

Total Missed Calls:

0

Total Call Time (in minutes):

1

Total SIP Message Sent:

12

Total SIP Message Received:

14

Total RTP Packet Sent:

341

Total RTP Packet Received:

392

Total RTP Packet Loss:

1

All Rights Reserved Grandstream Networks, Inc. 2005

MAC Address

The device ID, in HEX format. This is very important ID for ISP

 

troubleshooting.

WAN IP Address

This field shows WAN port IP address.

Product Model

This field contains the product model info, like HT487 is HT486

 

Rev:2.0

Software Version

Program: This is the main software release. This number is

 

always used for firmware upgrade. Here the box showed: 1.0.6.0

 

Bootloader: This is normally not changed.

 

HTML: This is the user interface, normally not changed.

 

VOC: This is the codec program, normally not changed.

System Uptime

This shows system up time since last reboot.

Registered

This shows whether the unit is registered to service provider’s

 

server.

PPPoE Link Up

This shows whether the PPPoE is up if connected to DSL modem

NAT

This shows what kind NAT the HandyTone is connected to via its

 

WAN port. It is based on STUN protocol.

20

Page 20
Image 20
Grandstream Networks 486 MAC Address, WAN IP Address, Product Model, Software Version, System Uptime, Registered