Installation and Safety Guide
11
1. Connect the PC to a router switch port.
The PC can be connected directly, or through your LAN.
To connect the PC directly to the router, use a straight-through Ethernet
cable to connect an Ethernet card on the PC to any one of the router’s
switch ports.
To connect via a LAN, use an Ethernet cable to connect the router’s switch
port(s) to the device(s) on the LAN. Select the LAN PC from which you
wish to configure the router. The PC should be in the same subnet as the
part of the LAN that contains the router (for example, the PC could be
connected to a hub or Layer 2 switch that is directly connected to one of
the router’s switch ports).
2. Assign the PC an IP address in the same subnet as the router.
The router’s default IP address is 192.168.1.1, and the default subnet mask is
255.255.255.0.
0
1
1
2
35
ASYN0 PIC BAYS
PIC0
PIC1
4
SYS
PWR
ETHERNETSTATUS
01
L/A
D/C
L/A
D/C
12345 0
1
SWITCH PORTS PIC
ETHERNET
CONSOLE
SWITCH PORTS
AR750S Secure VPN Router
Switch PortsPCAR750S Router
3421
10BASE-T/100BASE-TX SWITCH PORTS
POWER
ON
OFF
0
1
1
2
35
ASYN0 PIC BAYS
PIC0
PIC1
4
SYS
PWR
ETHERNETSTATUS
01
L/A
D/C
L/A
D/C
12345 0
1
SWITCH PORTS PIC
ETHERNET
CONSOLE
SWITCH PORTS
AR750S Secure VPN Router

PC

Switch Ports

AR750S Router

Hub or Layer 2 Switch