5-2. Amperage Adjustment Controls
60 Hz Model Shown
1
2
Control can be adjusted while welding.
1Remote Amperage Control Switch
For front panel control of a module, place switch on that module in Off position.
For remote control, place switch in On position. See Example below.
2 Amperage Adjustment Control
Use control at each module to select weld amperage for that mod- ule. The numbers are weld amperes.
3 Remote Hand Control
Example Of Combination Remote Amperage Control
3
Min (35 A)
Max (125 A)
Set Switch |
| Set Desired Maximum Amperage |
| Adjust Remote Control |
|
| |||
|
|
Ref.
5-3. Power Switch Push Buttons And Pilot Light
1 | 2 |
3
1Pilot Light
2Power On Push Button
Press button to turn unit, pilot light, and fan motors On.
3 Power Off Push Button
Press button to turn unit, pilot light, and fan motors Off.
