White Outdoor 105 Wheel Height Adjustment, Converting To Side Discharge, Setup and Adjustment

4. Insert post on cable ties into holes provided on the lower handle. Pull cable tie tight and trim excess. See Step 4 illustration.

Wheel Height Adjustment

5. Each wheel has a height adjustment lever to change the cutting height of the mower. Depress height adjustment lever towards the wheel and slide lever to desired position for a change in cutting height. See Step 5 illustration.

Converting To Side Discharge
6. Your mower has been shipped as a mulcher.
To convert it to a side-discharge mower, lift the
mulching plug (A). Slide the two hooks on the
side-discharge deflector under the hinge pin
on the mulching plug assembly (B). Lower the	Step 4
mulching plug. See Step 6 illustration.

2

1

3

Step 5

A

B

Step 6

3

Setup and

Adjustment

CUTTING HEIGHT Step 5

All wheels must be placed in the same relative position. For rough or uneven lawns, move the height adjust- ment lever to a higher position. This will stop scalping of grass.

IMPORTANT This unit is shipped without gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operating your mower.

7