Miller Electric MARK VIII-2 manual Dimensions, Weights And Base Mounting Hole Layout

4-2. Dimensions, Weights And Base Mounting Hole Layout

NOTE

Overall dimensions (A, B, and C) include lifting eye, handles, hardware, etc.

A H

B C Front

G

J

F

D

E

Ref. ST-144 567-A

	Dimensions
A	77-1/4 in (1943 mm)
B	72 in (1829 mm)
C	40 in (1016 mm)
D	52-1/2 in (1334 mm)
E	3/4 in (19 mm)
F	38-1/2 in (978 mm)
G	26-1/4 in (667 mm)
H	36 in (914 mm)
J	1/2 in Dia. (13 mm Dia.)
	4 Holes

Weight

4050 lb (1837 kg)

4-3. Selecting And Preparing Weld Output Cables

1 Weld Output Cable

2 3

2 1

10 ft (3 m)

4

For Example,

Total Cable

Length In Weld

Circuit = 20 ft (6 m)

Determine total cable length in weld circuit and maximum welding am- peres. Use Section 4-4to select proper cable size.

Use shortest cables possible. Do not use damaged cables.

2 Terminal Lug

Use lugs of proper amperage capacity and hole size for connect- ing to work clamp, electrode holder, and weld output terminals.

3 Insulated Electrode Holder

Install according to manufacturer’s instructions.

4Work Clamp Install onto work cable.

Tools Needed:

10 ft (3 m)

sb6.1* 5/94 − Ref. ST-144 570-A / Ref. S-0653

OM-218 Page 12