3Com MSR 30, MSR 50 manual Isis timer csnp, Isis timer hello

1070 CHAPTER 74: IS-IS CONFIGURATION COMMANDS

Examples # Configure the serial2/0 interface to send small Hello packets.

<Sysname> system-view [Sysname] interface serial 2/0 [Sysname-Serial2/0] isis small-hello

isis timer csnp

Syntax	isis timer csnp seconds [ level-1 level-2 ]
	undo isis timer csnp [ level-1 level-2 ]
View	Interface view
Parameters	seconds: Specifies the interval in seconds for sending CSNP packets over broadcast
	network, ranging from 1 to 600.
	level-1: Applies the interval to Level-1.
	level-2: Applies the interval to Level-2.
Description	Use the isis timer csnp command to specify the interval for sending CSNP
	packets over broadcast network.
	Use the undo isis timer csnp command to restore the default.
	The default CSNP interval is 10 seconds.
n	■ If no level is specified, the CSNP interval applies to both Level-1 and Level-2 of
	the current ISIS process. If a level is specified, the interval applies to the level.
	■ This command is not supported on the loopback interface.
	■ This command only applies to the DIS router, which sends CSNP packets
	periodically.
Examples	# Configure Level-2 CSNP packets to be sent every 15 seconds over the serial2/0
	interface.
	<Sysname> system-view
	[Sysname] interface serial 2/0
	[Sysname-Serial2/0] isis timer csnp 15 level-2
isis timer hello
Syntax	isis timer hello seconds [ level-1 level-2 ]
	undo isis timer hello [ level-1 level-2 ]

View Interface view