3Com MSR 50, MSR 30 manual Nat connection-limit-policy, 2031

2031

ftp: Supports FTP.

ils: Supports ILS.

nbt: Supports NBT.

pptp: Supports PPTP.

Description Use the nat alg command to enable NAT application layer gateway for the specified protocol.

Use the undo nat alg command to disable NAT application layer gateway.

By default, NAT application layer gateway is enabled.

Example # Enable NAT application layer gateway for FTP.

<Sysname> system-view

[Sysname] nat alg ftp

nat connection-limit-policy

Syntax nat connection-limit-policy policy-number

undo nat connection-limit-policy policy-number

View System view

Parameter policy-number: Number of the connection-limit policy to be bound with the NAT module. The value ranges from 0 to 19.

Description Use the nat connection-limit-policycommand to bind a connection-limit policy with the NAT module.

Use the undo nat connection-limit-policy command to remove the configuration.

Note that:

■A NAT module can be bound with only one policy.

■The globally configured connection limits are not effective unless a connection-limit policy is bound to the NAT module.

■If there are multiple NAT boards, the configuration applies to all the boards.

Example # Bind connection-limit policy 1 with the NAT module.

<Sysname> system-view

[Sysname]nat connection-limit-policy 1

# Remove the binding between connection-limit policy 1 and the NAT module.