3Com MSR 50 Peer enable IPv6 address family view, Peer fake-as IPv6 address family view, 1249

1249

<Sysname> system-view [Sysname] bgp 100 [Sysname-bgp] ipv6-family

[Sysname-bgp-af-ipv6] group test external

[Sysname-bgp-af-ipv6] peer test ebgp-max-hop

peer enable (IPv6 address family view)

Syntax peer { group-name ipv4-address } enable undo peer { group-name ipv4-address } enable

View IPv6 address family view

Parameters group-name: Name of an IPv4 peer group, a string of 1 to 47 characters. The IPv4 peer group should be created beforehand.

ipv4-address: IPv4 address of a peer.

Description Use the peer enable command to enable an IPv4 peer or peer group.

Use the undo peer enable command to disable an IPv4 peer or peer group.

By default, no IPv4 peer or peer group is enabled.

If an IPv4 peer or peer group is disabled, the router will not exchange routing information with it.

Examples # Enable peer 1.1.1.1.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv6-family [Sysname-bgp-af-ipv6] peer 1.1.1.1 enable

peer fake-as (IPv6 address family view)

Syntax peer { ipv6-group-name ipv6-address } fake-asas-number

undo peer { ipv6-group-name ipv6-address } fake-as

View IPv6 address family view

Parameters ipv6-group-name: Name of a peer group, a string of 1 to 47 characters. ipv6-address: IPv6 address of a peer.

as-number: Local autonomous system number, in the range 1 to 65535.