3Com MSR 50, MSR 30 manual Reset arp, Specified by the argument interface-type interface-number

695

Use the undo naturemask-arp enable command to restore the default.

By default, the support for ARP requests from a natural network is disabled.

Example # Enable the support for ARP requests from a natural network.

<Sysname> system-view [Sysname] naturemask-arp enable

reset arp

Syntax	reset arp { all dynamic static interface interface-typeinterface-number}
View	User view
Parameter	all: Clears all ARP entries.
	dynamic: Clears all dynamic ARP entries.
	static: Clears all static ARP entries.
	interface interface-typeinterface-number: Clears the ARP entries for the interface
	specified by the argument interface-type interface-number.
Description	Use the reset arp command to clear ARP entries except authorized ARP entries
	from the ARP mapping table.
	Note that with interface interface-typeinterface-numberspecified, the command
	clears only dynamic entries for the interface.
Related command:	arp static and display arp.
Example	# Clear all static ARP entries.
	<Sysname> reset arp static