3Com MSR 30, MSR 50 manual Display multicast routing-table static

1332 CHAPTER 87: MULTICAST ROUTING AND FORWARDING CONFIGURATION COMMANDS

<Sysname> display multicast routing-table Multicast routing table of VPN-Instance: public net Total 1 entry

00001. (172.168.0.2, 227.0.0.1) Uptime: 00:00:28

Upstream Interface: Ethernet1/1

List of 2 downstream interfaces

1:Ethernet1/2

2:Ethernet1/0

Table 324 Description on the fields of display multicast routing-table

Field	Description
00001	Sequence number of the (S, G) entry
(172.168.0.2, 227.0.0.1)	An (S, G) entry of the multicast forwarding table
Uptime	Length of time for which the (S, G) entry has been up, in
	hours:minutes:seconds
Upstream interface	Upstream interface the (S, G) entry: multicast packets should
	arrive at this interface
List of 2 downstream	Downstream interface list: these interfaces need to forward
interfaces	multicast packets

display multicast routing-table static

Syntax display multicast routing-table[ vpn-instancevpn-instance-name all-instance] static [ config ] [ source-address { mask-length mask } ]

View Any view

Parameter vpn-instance-name: VPN instance name, a case sensitive string of up to 31 characters.

all-instance: Specifies all VPN instances.

config: Displays the configuration information of static routes.

source-address: Multicast source address.

mask: Mask of the multicast source address.

mask-length: Mask length of the multicast source address, in the range of 0 to 32.

Description Use the display multicast routing-table static command to view the information of multicast static routes.

Example # View all the multicast static routes in the public instance.

<Sysname> display multicast routing-table static Multicast Routing Table of VPN-Instance: public net Routes : 1

Mroute 10.10.0.0/16
Interafce = Ethernet1/0	RPF Neighbor = 10.10.0.254

Matched routing protocol = <none>, Route-policy = <none>