3Com MSR 30, MSR 50 Debugging link-aggregation error, Syntax debugging link-aggregation error

488CHAPTER 28: LINK AGGREGATION DEBUGGING COMMANDS

<Sysname> debugging lacp state interface ethernet 1/2 rx

*0.1360830 Sysname LAGG/8/FSM:

Port Ethernet1/2: FSM Rx transfers from state RESERVE to state INITIALIZE

by the stimulation Begin_True

//RX state machine was initiated and then transited to the INITIALIZE state. The event that triggered the transition was the startup of the state machine (Begin_True).

*0.1360830 Sysname LAGG/8/FSM:

Port Ethernet1/2: FSM Rx transfers from state INITIALIZE to state PORT_DISABLED

by the stimulation UCT

//RX state machine transited from the INITIALIZE state to the PORT_DISABLED state unconditionally (identified by UCT).

*0.1360830 Sysname LAGG/8/FSM:

Port Ethernet1/2: FSM Rx transfers from state PORT_DISABLED to stat

e EXPIRED by the stimulation Lacp_Enabled

//RX state machine transited from the PORT_DISABLED state to the EXPIRED state. The event that triggered the transition was the enabling of LACP (Lacp_Enabled).

*0.1360862 Sysname LAGG/8/FSM:

Port Ethernet1/2: FSM Rx transfers from state EXPIRED to state CURRENT by the stimulation Pdu_Indicate

//RX state machine transited from the EXPIRED state to the CURRENT state (normal running state). The event that triggered the transition was the reception of the protocol packets from the peer (Pdu_Indicate).

debugging link-aggregation error

Syntax debugging link-aggregation error

undo debugging link-aggregation error

View User view

Default Level 1: Monitor level

Parameters None

Description Use the debugging link-aggregation error command to enable debugging for link aggregation errors.

Use the undo debugging link-aggregation error command to disable debugging for link aggregation errors.

By default, debugging for link aggregation errors is disabled.