3Com MSR 50 153, Rmon Configuration Commands, Display rmon alarm, Related command rmon alarm

153

RMON CONFIGURATION COMMANDS

display rmon alarm

Syntax display rmon alarm [ entry-number]

View Any view

Parameter entry-number: Index of an RMON alarm entry, in the range 1 to 65535. If no entry is specified, the configuration of all alarm entries is displayed.

Description Use the display rmon alarm command to display the configuration of the specified or all RMON alarm entries.

Related command: rmon alarm.

Example # Display the configuration of all RMON alarm table entries.

<Sysname> display rmon alarm

Alarm table 1 owned by user1 is VALID.

Samples type		: absolute
Variable formula		: 1.3.6.1.2.1.16.1.1.1.4.1<etherStatsOctets.1>
Sampling interval		: 10(sec)
Rising threshold		: 50(linked with event 1)
Falling threshold		: 5(linked with event 2)
When startup enables		: risingOrFallingAlarm
Latest value		: 0
Table 608 Description on the fields of the display rmon alarm command
Field	Description
Alarm table	Alarm entry index, 1 in this example
owned by	Owner of the entry, user1 in this example
VALID	Status of the entry identified by the index (VALID means the entry is
	valid, and UNDERCREATION means invalid. You can use the display
	rmon command to view the invalid entry and with the display
	current-configuration and display this commands you cannot view
	the corresponding rmon commands.)
Samples type	The sampling type (absolute in this example)
Variable formula	Formula for the sampling value
Sampling interval	Sampling interval
Rising threshold	Alarm rising threshold (When the sampling value is bigger than or
	equal to this threshold, a rising alarm is triggered.)
Falling threshold	Alarm falling threshold (When the sampling value is smaller than or
	equal to this threshold, a falling alarm is triggered.)