Yeoman YM-CL3MF, YM-CL8W manual Cast Top, co alarms, Installation Instructions, Top Flue, Rear Flue

INSTALLATION INSTRUCTIONS

7. CAST TOP

This appliance can be fitted with an optional cast top plate. The type of plate will depend on whether the appliance is installed with a top* or rear flue exit.

	Top Flue	Rear Flue
Yeoman CL3	YM-CL3CT	YM-CL3CTR
Yeoman CL5	YM-CL5CT	YM-CL5CTR
Yeoman CL8	YM-CL8CT	YM-CL8CTR

*The cast top must be fitted at the same time as the flue connection (see Installation Instructions, Sections 1 & 7).

7.1The cast top plate has 4 silicon feet on the bottom to space it off the top of the appliance by 6mm and allow the door to open freely.

Cast feet

PR8756

7.2Place the cast top plate feet down on top of the appliance.

—Ensure the cast top is flush with the front and sides of the appliance.

—For the top flue version, position the cutout over the flue ring.

Line up edges

of cast top

plate with the

appliance

PR8744

8. co alarms

All open flued appliances can be affected by temporary atmospheric conditions which may allow fumes to enter the house. Building regulations require that whenever a new or replacement fixed solid fuel or wood/biomass appliance is installed in a dwelling a carbon monoxide alarm must be fitted in the same room as the appliance. Further guidance on the installation of the carbon monoxide alarm is available in the latest edition of

BS EN50292 and from the alarm manufacturer's instructions.

Provision of an alarm must not be considered a substitute for either installing the appliance correctly or ensuring regular servicing and maintenance of the appliance and chimney system.

23