USER INSTRUCTIONS
Air Inlets |
Log Guard | PR8742 |
5.Running The appliance
5.1Burning Wood
Airwash: Adjust
PR8726
5.2Burn new logs at a high temperature for a few minutes before adjusting the Airwash control.
Refuel little and often for clean, efficient burning.
5.3Experience establishes settings to suit personal preferences.
5.4Do not burn large amounts of fuel with the Airwash Control closed for long periods of time. This reduces the glass cleaning effect and causes tars and creosotes to build- up in the appliance and flue system.
5.5When in use, burning the appliance at a high temperature for a short period also reduces tars and creosotes.
5.6Burning Solid Fuel
Solid Fuel can only be burned in a
Only for use with recommended fuels (see User Instructions, Section 3).
Set air controls (see Diagram 9).
Airwash: 50%
Primary Air: 50%
PR8727
5.7
5.8Experience establishes control settings to suit personal preferences.
5.9Do not burn large amounts of fuel with the Primary Air Control on a low setting for long periods of time. This reduces the glass cleaning effect of the Airwash and causes tars and creosotes to
5.10When in use, burning the appliance at a high temperature for a short period also reduces tars and creosotes.
5.11You must burn only anthracite or smokeless fuels suitable for use in closed appliances.
7